Boss Brand Household Pressure Washer Not Pumping Water: Troubleshooting and Solutions217

The Boss brand household pressure washer is a popular choice for homeowners looking for an easy and affordable way to clean their cars, patios, and siding. However, like any other appliance, the Boss pressure washer can sometimes experience problems, such as not pumping water. If you're experiencing this issue, there are a few simple things you can check to troubleshoot the problem.

1. Check the water source

The first thing you should check is the water source. Make sure that the hose is connected to a working faucet and that the water is turned on. If the hose is not connected properly, the pressure washer will not be able to draw water.

2. Check the pump inlet filter

The pump inlet filter is located at the bottom of the pressure washer. It is designed to prevent debris from entering the pump and damaging it. If the filter is clogged, it can restrict the flow of water to the pump and cause the pressure washer to not pump water.

3. Check the pump

If the water source and the pump inlet filter are both clear, the problem may be with the pump itself. The pump is responsible for pressurizing the water and forcing it out of the nozzle. If the pump is not working properly, the pressure washer will not be able to pump water.

4. Check the nozzle

The nozzle is located at the end of the pressure washer wand. It is responsible for directing the stream of water. If the nozzle is clogged, it can restrict the flow of water and cause the pressure washer to not pump water.

5. Check the unloader valve

The unloader valve is located on the side of the pressure washer. It is responsible for releasing pressure from the pump when the trigger is not engaged. If the unloader valve is not working properly, it can cause the pump to overheat and shut down.

6. Check the thermal overload switch

The thermal overload switch is located on the side of the pressure washer. It is designed to protect the motor from overheating. If the thermal overload switch is tripped, it will shut off the motor and prevent the pressure washer from working.

7. Contact customer service

If you have checked all of the above and the pressure washer is still not pumping water, you should contact customer service. They will be able to help you troubleshoot the problem and get your pressure washer working again.

Additional tips

Here are a few additional tips that can help you troubleshoot problems with your Boss brand household pressure washer:
Make sure that the pressure washer is on a level surface.
Avoid using the pressure washer in direct sunlight.
Do not use the pressure washer to clean hot surfaces.
Store the pressure washer in a dry place when not in use.

2025-02-21

Previous：Xiaomi Electric Scooter Flat Tire: Causes, Prevention, and Repair

Next：Why Does My Sentda Car Radio Keep Getting Scrambled?