Shortening a Chain on an Electric Chainsaw131

An electric chainsaw is a powerful tool that can make quick work of cutting through wood. However, if the chain is too long, it can be difficult to control the saw and can even be dangerous. In this article, we will show you how to shorten a chain on an electric chainsaw so that it is the correct length for your needs.

Tools and Materials* Electric chainsaw
* Safety glasses
* Gloves
* Chain saw chain
* Chain saw file
* Chain saw wrench

Instructions1. Put on safety glasses and gloves. Always wear safety gear when working with a chainsaw.
2. Unplug the chainsaw. Never work on a chainsaw that is plugged in.
3. Remove the chain cover. The chain cover is usually held in place by two or three bolts. Remove the bolts and lift off the cover.
4. Loosen the chain tensioner. The chain tensioner is usually located on the side of the chainsaw. Turn the tensioner knob counterclockwise to loosen the chain.
5. Remove the chain from the bar. Pull the chain off the bar, starting at the tip.
6. Count the number of links in the chain. The number of links in the chain will determine the length of the chain.
7. Determine how many links to remove. You will need to remove enough links so that the chain is the correct length for your needs. The correct length will vary depending on the size of the chainsaw and the type of wood you are cutting.
8. Use a chain saw file to grind down the rivets on the links you are removing. Be careful not to grind down the rivets too much, or the chain will be weakened.
9. Remove the links from the chain. Once the rivets are ground down, you can use a pair of pliers to remove the links from the chain.
10. Reassemble the chain. Put the chain back on the bar, starting at the tip. Make sure that the chain is running in the correct direction.
11. Tighten the chain tensioner. Turn the tensioner knob clockwise to tighten the chain. The chain should be tight enough so that it does not sag, but not so tight that it is difficult to move.
12. Replace the chain cover. Put the chain cover back on the chainsaw and tighten the bolts.
13. Plug in the chainsaw and test it. Make sure that the chain is running smoothly and that it is the correct length.

Tips* If you are not sure how to shorten a chain on an electric chainsaw, consult a qualified professional.
* Always wear safety gear when working with a chainsaw.
* Never work on a chainsaw that is plugged in.
* Be careful not to grind down the rivets on the links too much, or the chain will be weakened.
* The correct chain length will vary depending on the size of the chainsaw and the type of wood you are cutting.

2024-11-17

Previous：Model Airplane Screwdriver Kit: A Comprehensive Guide

Next：Screwdriver Set Sizes