How to Replace the Output Shaft on a Chinese Electric Chainsaw292

Replacing the output shaft on a Chinese electric chainsaw is a relatively simple task that can be completed in about 30 minutes. The output shaft is the part of the chainsaw that connects the motor to the chain. It is made of steel and is typically about 12 inches long.

To replace the output shaft, you will need the following tools:
10mm socket wrench
13mm socket wrench
17mm socket wrench
Flathead screwdriver
Phillips head screwdriver
Hammer
Punch

Once you have gathered your tools, you can begin the replacement process. First, unplug the chainsaw from the power source. Then, remove the chain and guide bar from the saw. Next, remove the clutch cover by unscrewing the four 10mm bolts that hold it in place.

Once the clutch cover is removed, you will see the output shaft. The output shaft is held in place by two 13mm bolts. Remove these bolts and the output shaft will be free to slide out of the chainsaw.

To install the new output shaft, simply slide it into place and tighten the two 13mm bolts. Next, replace the clutch cover and tighten the four 10mm bolts. Finally, reattach the chain and guide bar to the saw and plug it back into the power source.

Here are some additional tips for replacing the output shaft on a Chinese electric chainsaw:
Be sure to wear safety glasses and gloves when performing this task.
Use a torque wrench to tighten the bolts to the correct specifications.
If the output shaft is stuck, you can use a hammer and punch to knock it loose.
If you are not comfortable performing this task, you can take the saw to a qualified repair technician.

Replacing the output shaft on a Chinese electric chainsaw is a relatively simple task that can be completed in about 30 minutes. By following these steps, you can safely and easily replace the output shaft and get your saw back up and running in no time.

2024-12-13

Previous：Chinese Kitchen Gadgets: The Ultimate Guide

Next：The Right Way to Shave with an Electric Razor