DIY Electric Chainsaw from Angle Grinder102

Angle grinders are versatile power tools that can be used for a variety of tasks, including cutting, grinding, and polishing. However, with a few modifications, an angle grinder can also be converted into a functional electric chainsaw, making it a valuable tool for cutting firewood, pruning trees, and other outdoor tasks.

Converting an angle grinder into an electric chainsaw is a relatively simple process that can be completed in a few hours. The following steps will guide you through the process:1. Gather your materials.
* Angle grinder
* Chainsaw chain
* Guide bar
* Sprocket
* Chain tensioner
* Safety glasses
* Dust mask
* Gloves
2. Remove the angle grinder's guard.
* The guard is essential for protecting the user from the spinning disc of the angle grinder, but it must be removed in order to convert the tool into a chainsaw.
* Use a wrench to loosen the bolts that hold the guard in place, and then remove the guard.
3. Install the sprocket on the angle grinder's shaft.
* The sprocket is what will drive the chainsaw chain.
* Slide the sprocket onto the shaft of the angle grinder and secure it with a nut.
4. Install the guide bar.
* The guide bar is the long, flat piece of metal that the chainsaw chain will run on.
* Insert the guide bar into the slot on the angle grinder's housing and secure it with the bolts.
5. Install the chainsaw chain.
* The chainsaw chain is the cutting element of the saw.
* Hook one end of the chainsaw chain over the sprocket and then wrap the chain around the guide bar.
* Connect the two ends of the chain and secure them with a master link.
6. Install the chain tensioner.
* The chain tensioner is used to adjust the tension of the chainsaw chain.
* Insert the chain tensioner into the slot on the angle grinder's housing and secure it with a bolt.
7. Test the electric chainsaw.
* Once the electric chainsaw is assembled, it is important to test it out before using it for any real work.
* Put on your safety glasses and dust mask and start the chainsaw.
* Hold the chainsaw firmly and slowly guide it through a piece of wood.
8. Use the electric chainsaw.
* Once you are satisfied that the electric chainsaw is working properly, you can use it to cut firewood, prune trees, and perform other outdoor tasks.
Safety precautions:
* Always wear safety glasses and a dust mask when operating any power tool.
* Keep the electric chainsaw out of reach of children.
* Never use the electric chainsaw in wet or slippery conditions.
* Be aware of the surroundings and avoid cutting near power lines or other hazards.