How to Disassemble a VGOD Dripper166

VGOD drippers are known for their high quality and performance, but they can be a bit tricky to disassemble. If you're not careful, you could damage the device or its components. That's why we've put together this guide on how to disassemble a VGOD dripper safely and easily.

Tools you'll need

Before you start, you'll need to gather a few tools. These include:* A small screwdriver
* A pair of tweezers
* A clean cloth

Step-by-step instructions

Once you have your tools, you can follow these step-by-step instructions to disassemble your VGOD dripper:1.

Remove the drip tip. The drip tip is the mouthpiece of the dripper. To remove it, simply pull it straight up.2.

Remove the top cap. The top cap is the part of the dripper that covers the build deck. To remove it, unscrew the two screws that hold it in place.3.

Remove the build deck. The build deck is the part of the dripper where you install your coils and wick. To remove it, unscrew the two screws that hold it in place.4.

Remove the coils and wick. The coils are the metal wires that heat up and vaporize the e-liquid. The wick is the material that absorbs the e-liquid and delivers it to the coils. To remove the coils and wick, simply pull them out of the build deck.5.

Clean the parts. Once you have disassembled the dripper, it's important to clean the parts. You can do this by wiping them down with a clean cloth or by soaking them in warm water.6.

Reassemble the dripper. Once the parts are clean, you can reassemble the dripper. To do this, simply follow the steps in reverse order.

Tips*

Be careful not to overtighten the screws when you reassemble the dripper. Overtightening can damage the device or its components.*

If you're having trouble removing the coils or wick, you can try using a pair of tweezers.*

If you're not sure how to reassemble the dripper, you can refer to the user manual that came with the device.

2025-01-28

Previous：Blood Pressure Monitor Placement

Next：The Evolution of Blood Pressure Monitors